User manual

KRAMER: SIMPLE CREATIVE TECHNOLOGY
Operating the VP-423 PC Video-Wall Scaler
8
6.2.2 The MAIN MENU
Table 2 defines the main menu parameters and functions:
Table 2: The Main Menu Parameters and Functions
Parameter
Function
WALL
ARRANGEMENT
Sets the wall arrangement (see Section 6.2.3)
COLOR Adjusts the colors (see Section 6.3)
FINETUNE Fine tunes the position of the display and the timing parameters (see Section
6.4)
FACTORY RESET Resets the device to its factory default parameters
INFORMATION Displays the source, input and output resolutions and the software version
AUTO SYNC Turn the auto sync ON/OFF
EXIT Select to exit the OSD
6.2.3 The WALL ARRANGEMENT Submenu
The WALL ARRANGEMENT menu defines the wall arrangement setup, as
defined in
Table 3:
Table 3: The WALL ARRANGEMENT Menu Parameters and Functions
Parameter
Function
Range
Default
DISP. WIDTH Set the number of screens comprising the
width of the wall display
1 to 4 1
DISP. HEIGHT Set the number of screens comprising the
height of the wall display
1 to 4 1
DISP. POS X Set the X position of the display in the matrix 1 to 4 1
DISP. POS Y Set the Y position of the display in the matrix 1 to 4 1
LEFT FINETUNE Move the picture on the screen to the left 0 to 255 0
RIGHT FINETUNE Move the picture on the screen to the right 0 to 255 0
TOP FINETUNE Move the picture on the screen up 0 to 255 0
BOTTOM FINETUNE Move the picture on the screen down 0 to 255 0
OUTPUT Sets the output resolution (see Table 4)
EXIT Select to exit the OSD