User manual

KRAMER: SIMPLE CREATIVE TECHNOLOGY
Setting the Wall Arrangement
10
6.3 The COLOR Submenu
Table 5 defines the COLOR menu:
Table 5: The COLOR Menu – Available Adjustments
Parameter
Function
CONTRAST Adjust the contrast
BRIGHTNESS Adjust the brightness
R Adjust the red component
G Adjust the green component
B Adjust the blue component
AUTOCOLOR Set the color automatically
EXIT Exit this menu
R-OFFSET
1
Set the color changes to match the difference in color
settings on the various displays (in addition to setting the
colors)
G-OFFSET
B-OFFSET
6.4 The FINETUNE Submenu
Table 6 defines the FINETUNE menu:
Table 6: The FINETUNE Submenu
Parameter
Function
AUTO ADJUST Automatically adjusts the parameters below
H-POSITION Set the horizontal position of the display
V-POSITION Set the vertical position of the display
CLOCK
2
Adjust the clock frequency
PHASE
2
Adjust the clock phase
EXIT Exit this menu
7 Setting the Wall Arrangement
To set the wall arrangement, do the following:
1. Set the input resolution from the PC to the highest possible resolution.
2. Press the MENU front panel button to activate the OSD, and select the
WALL ARRANGEMENT submenu.
3. Select OUTPUT and select the display's native resolution (for example,
1920x1200
).
Be sure to set the resolution on all the scalers to the same value.
1 Color offset relative to the black level
2 We recommend adjustment via the auto adjust function rather than manually adjusting the clock and phase