User manual

KRAMER: SIMPLE CREATIVE TECHNOLOGY

Technical Specifications

8. Adjust the color of the displays so that they all match:

 Press the MENU front panel button and Enter the COLOR submenu

 In the COLOR submenu select AUTOCOLOR

 If required, adjust the CONTRAST, BRIGHTNESS, R, G and B

values on each display manually

9. Adjust the quality of the display on each screen.

It is recommended to set and adjust the wall arrangement, with a circular

image showing on the screens:

 Press the MENU front panel button and Enter the WALL

ARRANGEMENT submenu

 In the WALL ARRANGEMENT submenu set the following

parameters: RIGHT FINETUNE, LEFT FINETUNE, TOP

FINETUNE AND BOTTOM FINETUNE to move the picture on each

screen to fit the adjacent screen

Note: after any change to the input or output resolution, perform the setup

procedure once again

8 Technical Specifications

Table 7 lists the technical specifications:

Table 7: Technical Specifications

INPUT:

of the VP-423 PC Video-Wall Scaler

1 PC, looping on a 15-pin HD connector with termination switch

OUTPUT: 1 PC on a 15-pin HD connector, loop output (passive)

OUTPUT RESOLUTIONS: 640x480 60Hz (VGA), 800x600 60Hz (SVGA), 1024x768 60Hz (XGA),

1280x768 60Hz, 1280x800 60Hz (WXGA), 1280x1024 60Hz (SXGA),

1440x900 60Hz (WXGA+), 1400x1050 60Hz (SXGA+), 1680x1050 60Hz

(WSXGA), 1600x1200 60Hz (UXGA), 1920x1200 60Hz (WUXGA),

1280x720 60Hz, 1920x1080 60Hz, 1280x720 50Hz and 1920x1080 50Hz,

1360x768 60Hz

OUTPUT REFRESH RATE: 60Hz

PROCESSING DELAY: 20ms

CONTROLS: Front panel buttons, ON LED

POWER SOURCE: 5V DC, 800mA

DIMENSIONS: 18.8cm x 11.4cm x 2.45cm (7.4” x 4.5” x 0.98”) W, D, H

WEIGHT: 0.66kg (1.45lbs) approx.

ACCESSORIES: Power supply

OPTIONS: 19" rack adapter

1 Specifications are subject to change without notice