User manual

VP-426 - Operating the VP-426
9
5 Operating the VP-426
The VP-426 is operated directly using the front panel buttons and the OSD menu
(see Section 5.2).
5.1 Operating the VP-426 from the Front Panel Buttons
During normal operation (without the OSD), the front panel buttons perform the
following functions:
 Pressing MENU opens the on-screen display (OSD) main menu (see
Section 5.2), the next press closes the OSD
 Pressing +/FREEZE freezes the display, the next press unfreezes the
display
 Pressing MENU and –/AUTO ADJUST together resets the display to 720p
 Pressing ENTER and +/FREEZE together resets the display to XGA
5.2 Using the OSD
You can use the OSD to set a wide variety of parameters. When the MENU button
is pressed, the main menu opens (see Section 5.2.2) allowing access to all the
device settings.
5.2.1 Operating the OSD from the Front Panel Buttons
While the OSD is open, the front panel buttons perform the following functions:
 Pressing - and + move forward and backward through the menu items and
decrement or increment the parameter values
 Pressing ENTER selects and activates a menu item or accepts the
parameter value set
 Pressing MENU closes the OSD menu
The menu times out by default after 10 seconds. To change the OSD display time,
adjust the OSD/TIMER parameter.