User manual

10
VP-426 - Operating the VP-426
As an example of setting parameters, to increase the contrast on the display:
1. From normal operation, press MENU.
The OSD main menu appears on the screen.
2. Press the + or – button to highlight CONTRAST.
CONTRAST changes to green when highlighted.
3. Press ENTER.
The contrast value parameter changes to red.
4. Press the + button to increase the value (increase the contrast) or
the – button to decrease the value (decrease the contrast).
The value ranges from 0 to 100.
5. Press ENTER to set the value.
The contrast value parameter changes back to white.
6. To return to normal operation, highlight EXIT and press ENTER, press
MENU, or wait until the menu times out.
5.2.2 The OSD Menu Structure
Main Menu
Submenu
Values
Notes
Picture
Contrast
0-100
Adjusts the contrast
Brightness
0-100
Adjusts the brightness
Finetune
Hue 0-100
Adjusts the other ProcAmp
parameters
Saturation 0-100
Sharpness 0-100
Noise Reduction
Off-Low-Middle-High
Exit
Select to exit to the Main Menu
Color
Red 0-100
Adjusts the individual color
components of the display
Green 0-100
Blue 0-100
Exit
Select to exit to the Main Menu
Input
Source
PC/YPbPr
Select for PC source
HDMI
Select for HDMI source
Exit
Select to exit to the Main Menu