User manual

12
VP-426 - Operating the VP-426
Main Menu
Submenu
Values
Notes
Advanced
HDCP on input
On/Off
Selects the HDCP option for the
HDMI input: either ON (the default)
or OFF.
Setting HDCP support to enabled
(ON) on the HDMI input allows the
source to transmit a non-HDCP
signal if required (for example,
when working with a Mac computer)
Auto sync off
Off/Fast/Slow
Turns the auto sync
OFF/FAST/SLOW. When ON, a
short period after not detecting a
valid video signal on the selected
input, the unit will disable the H and
V syncs on the analog outputs until
a valid input is again detected or
any keypad is pressed.
When set to 'Fast' state - sync is off
after 17 seconds
Auto input scan
On/Off
Automatically scans the inputs and
selects the first live one found
(default OFF)
Auto image
On/Off
Freeze
Freeze only/mute
only/freeze+mute
Select to freeze and/or mute the
display
Exit
Select to exit to the Main Menu
About
Source
Displays the source, input and
output resolutions and the software
version
Input
Output
Version
Factory
Reset
Resets the device to its factory
default parameters and
automatically senses the input and
output devices
Exit
Select to exit to the Main Menu
Exit
Select to exit the OSD