User manual

12
VP-434 - Operating the VP-434
5.3 Using the Infrared Remote Control Transmitter
You can control the VP-434 from the infrared remote control transmitter, as
defined in Figure 4:
Figure 4: Infrared Remote Control
Transmitter
Keys
Function
SIZE
Set the size of the image displayed
POWER
Toggle the power save mode ON or
OFF
HD
Select the component video input
PC
Select the UXGA input
HDMI
Not used
VGA
Set the output resolution to VGA
SVGA
Set the output resolution to SVGA
XGA
Set the output resolution to XGA
SXGA
Set the output resolution to SXGA
UXGA
Set the output resolution to UXGA
1080i
Set the output resolution to 1080i
480p
Set the output resolution to 480p
720p
Set the output resolution to 720p
1080p
Set the output resolution to 1080p
INFO
Displays the selected input, the input
and output resolutions and the
firmware versions on the OSD
NATIVE
Select the output resolution from the
EDID of the connected HDMI
monitor
Four navigation keys
OK
Press to accept changes
MENU
Enter the OSD menu
EXIT
EXIT the menu
POWER
SIZE
HD PC HDMI
VGA SVGA XGA
SXGA UXGA 1080i
1080p480p 720p
NATIVE
EXIT
INFO
MENU
OK