User manual

Installing and Running the DeviceInstaller™ Configuration Software
9
The unit’s configuration is stored in non-volatile memory and is retained
without power. The unit performs a reset after the configuration has been
changed and stored.
2.5 Configuring the Ethernet Port Using the Web Manager Page
To configure the Ethernet Port via a Web browser:
1. Select the Web Configuration tab (see
Figure 12
).
Figure 12: The Web Configuration Tab
2. Select either the internal Web browser (GO) or the External Browser.
3. After clicking GO (for the internal browser), the “Connect to…”
window appears.
Figure 13: The Connect to… Window
4. Click OK.
The Web Manager window is displayed.