User manual

Connecting to the Kramer Device via the Ethernet Port
1
1 Connecting to the Kramer Device via the Ethernet Port
You can connect the machine via the Ethernet in the following ways:
• For direct connection to the PC, use a crossover cable (see
Section 1.1 )
• For connection via a network hub or network router, use a straight-
through cable (see
Section 1.2 )
1.1 Connecting the Ethernet Port Directly to a PC (Crossover Cable)
You can connect the Ethernet port of the Kramer Machine to the Ethernet
port on your PC, via a crossover cable with RJ-45 connectors.
This type of connection is recommended for identification of the factory default
IP Address of the Kramer Machine during the initial configuration
After connecting the Ethernet port, configure your PC as follows:
1. Right-click the My Network Places icon on your desktop.
2. Select Properties.
3. Right-click the relevant Local Area Connection Properties.
4. Select Properties.
The Local Area Connection Properties window appears.
5. Select the Internet Protocol (TCP/IP) and click Properties (see
Figure 1).
Figure 1: Local Area Connection Properties Window
6. Select Use the following IP address, and fill in the details as shown in
Figure 2.