User manual

20
VP-461 - The OSD Menu
Setting
Function
Volume
Set the input/output volume level [dB], see Figure 14 E
Input Volume [dB] – to adjust the audio input level
Output level [dB] – to adjust the audio output level
The output audio level can also be set via the + and – buttons on the front
panel buttons (when not in the OSD mode) and/or the IR remote control
transmitter buttons (see Section 7.4)
Balance
Set the balance [ratio] E
Treble
Set the treble [dB] E
Bass
Set the bass level [dB] E
Lip Sync
Set the Lip Sync delay value [msec] E
Analog Takeover
Set the Analog Takeover E:
On – for the PC IN analog input to take over all the embedded inputs
Off – to use the embedded inputs
As long as Analog Takeover is ON, the embedded audio is disabled
Figure 14: Set the Output Volume Level