Owner's manual

VP-4x1CS - Connecting the VP-4x1CS 4x1 PC Graphics Clean Switcher

6.4.1 Connecting the Ethernet Port Directly to a PC

You can connect the Ethernet port of the VP-4x1CS to the Ethernet port on your

PC via a crossover cable with RJ-45 connectors.

This type of connection is recommended for identification of the factory

default IP Address of the VP-4x1CS during the initial configuration

After connecting the Ethernet port, configure your PC as follows:

1. On your desktop, right-click the My Network Places icon.

2. Select Properties.

3. Right-click Local Area Connection Properties.

4. Select Properties.

The Local Area Connection Properties window appears.

5. Select the Internet Protocol (TCP/IP) and click the Properties Button (see

Figure 7).

Figure 7: Local Area Connection Properties Window