Owner's manual

VP-4x1CS - Connecting the VP-4x1CS 4x1 PC Graphics Clean Switcher
13
6. Select Use the following IP Address, and fill in the details as shown in
Figure 8. You can use any IP address in the range 192.168.1.1 to
192.168.1.255 (excluding 192.168.1.39) that is provided by your IT
department.
7. Click OK.
Figure 8: Internet Protocol (TCP/IP) Properties Window
6.4.2 Connecting the Ethernet Port via a Network Hub
You can connect the Ethernet port of the VP-4x1CS to the Ethernet port on a
network hub or network router, via a straight through cable with RJ-45 connectors.
6.5 Ethernet Port Configuration
To configure the Ethernet port, use either the embedded Web pages (see
Section 7.2.7) or the K-Upload Software which is available for download from
http://www/kramerelectronics.com.