Owner's manual

VP-4x1CS - Contents
i
Contents
1 Introduction 1
2 Getting Started 2
2.1 Achieving the Best Performance 2
2.2 Safety Instructions 2
2.3 Recycling Kramer Products 3
3 Overview 4
4 Defining the VP-4x1CS 4x1 PC Graphics Clean Switcher 5
4.1 Using the IR Transmitter 7
5 Installing in a Rack 8
6 Connecting the VP-4x1CS 4x1 PC Graphics Clean Switcher 9
6.1 Connecting the Remote Selector and Mute Switches 10
6.2 Connecting a Balanced/Unbalanced Stereo Audio Output 11
6.3 Connecting to the VP-4x1CS via RS-232 11
6.4 Connecting to the VP-4x1CS via Ethernet 11
6.5 Ethernet Port Configuration 13
7 Operating the VP-4x1CS 4x1 PC Graphics Clean Switcher 14
7.1 Operating the VP-4x1CS Locally 14
7.2 Operating the VP-4x1CS Remotely Using the Embedded Web Pages 16
7.3 Using the K-Single Application 23
8 Wiring the TP RJ-45 Ethernet Connector 24
9 Technical Specifications 25
10 Default Communication Parameters 26
11 Kramer Protocol 2000 27
11.1 Protocol 2000 Hex Codes 29
12 Protocol 3000 31
12.1 Kramer Protocol 3000 Syntax 31
12.2 Kramer Protocol 3000 Commands 34
Figures
Figure 1: VP-4x1CS 4x1 PC Graphics Clean Switcher Front Panel 5
Figure 2: VP-4x1CS 4x1 PC Graphics Clean Switcher Rear Panel 6
Figure 3: Connecting the VP-4x1CS 4x1 PC Graphics Clean Switcher 9
Figure 4: Remote Selector and Output Mute Switch Connection 10
Figure 5: Balanced Stereo Audio Connection 11
Figure 6: Unbalanced Stereo Audio Connection 11
Figure 7: Local Area Connection Properties Window 12
Figure 8: Internet Protocol (TCP/IP) Properties Window 13
Figure 9: Java Test Page Success Message 17
Figure 10: The Loading Page 18
Figure 11: First Time Security Warning 18
Figure 12: VP-4x1CS Switching Matrix Page 19
Figure 13: Switching an Input to an Output 20
Figure 14: Exiting Offline Warning 21
Figure 15: Audio Gain Page 21
Figure 16: Configurations Page 22
Figure 17: TP Pinout Wiring 24