Owner's manual

4 Defining the VP-4x1CS 4x1 PC Graphics Clean Switcher
This section defines the front and rear panels of the VP-4x1CS.
Figure 1: VP-4x1CS 4x1 PC Graphics Clean Switcher Front Panel
#
Feature
Function
1
IR Receiver and LED
Signal receiver and LED for the infrared remote control transmitter. The indicator LED
lights yellow when receiving an IR signal
2
ON LED
The LED lights green when the device is powered on
3
OFF Button
Press to mute the output
4
INPUT SELECTOR 1~4 Buttons
Press one of the 4 input buttons to switch it to the output
5
PRIORITY Button
Press to set the current active input as the priority input. Press again to cancel priority
input selection (see Section 7.1.1)
6
LOCK Button
Press and hold to lock the front panel buttons. Press and hold again to unlock the
buttons (see Section 7.1.3)
7
AUDIO LEVEL Control
Rotate clockwise to increase the audio level and anticlockwise to decrease the audio
level of the audio output
5
VP-4x1CS
– Defining the
VP-4x1CS PC Graphics Clean
Switcher