Owner's manual

VP-4x1CS
– Defining the V
P-4x1CS PC Graphics Clean
Switcher
6
Figure 2: VP-4x1CS 4x1 PC Graphics Clean Switcher Rear Panel
#
Feature
Function
1
AUDIO IN1~IN4 Unbalanced Stereo Audio 3.5mm Mini Jacks
Connect to up to 4 unbalanced, stereo audio sources
2
PC VIDEO IN1~IN4 UXGA 15-pin HD Connectors (F)
Connect to up to 4 PC graphics sources
3
PC OUT UXGA 15-pin HD Connector (F)
Connect to the PC graphics acceptor
4
ETHERNET RJ-45 Connector
Connect to a PC via a LAN to control the device (see Section 6.4)
5
RS-232 Serial Port 9-pin D-sub Connector (F)
Connect to a PC/serial controller (see Section 6.3)
6
REMOTE IR Opening
Connect to an external IR receiver for controlling the device using an IR
remote controller (see Section 4.1)
7
Mains Power Connector, Fuse and Power Switch
Plug in the power cord and switch the device on and off
8
AUDIO OUT Unbalanced Stereo Audio 3.5mm Mini Jack
Connect to the unbalanced, stereo audio acceptor (see Section 6.2)
9
AUDIO OUT Balanced Stereo Audio 5-pin Terminal Block
Connect to the balanced, stereo audio acceptor
10
RESET Button
Press and hold while powering on to reset the device to factory default (see
Section 4.1)
11
REMOTE Contact Closure Selector and Mute Switches 6-way
Terminal Block
Connect pins 1 to 4 and G to up to 4 remote, input selector, contact closure
switches. Connect the OFF and G pins to a remote mute switch (see
Section 6.1)