Owner manual

VP-4x4K - Controlling via the Embedded Web Pages 29

The Web embedded screens let you control the VP-4x4K via the Ethernet. The

menu appears on the left side of the screen. There are three remote operation

Web pages:

• The switching matrix (see Section

8.2)

• Audio gain control (see Section

8.3)

• Configuration (see Section

8.4)

A help box is available for each screen when clicking the question

mark that appears on the left side of the screen.

8.2 The VP-4x4K Switching Matrix Page

The VP-4x4K switching matrix page lets you route any or all of the four inputs to

any or all of the eight outputs, by clicking the audio and/or video signal indicators

(purple and blue, respectively):

Figure 16: VP-4x4K Embedded Web Page

You can perform the following operations via this Web page:

• Operate in the AFV mode or switch the audio and video separately, by

clicking the Audio, Video or AFV buttons (see Section 8.2.1)

• Deselect an audio and/or video signal (depending on the operation mode –

Audio, Video or AFV) by clicking that signal indicator