Owner manual

VP-4x4K - Kramer Protocol 51
Network Setting Commands
ethernet port ETHP?
PROTOCOL = TCP/UDP (transport layer protocol)
PORT = ethernet port to enter Protocol 3000 commands.
1-65535 = User defined port
0 - reset port to factory default (50000 for UDP, 5000 for TCP)
Advanced Switching Commands
Command Syntax Response
Set audio follow video mode
AFV AFV-MODE AFV AFV-MODE RESULT
Note:
This command effect device front-panel mode and AUD\VID command.
Read audio follow video mode AFV?
AFV AFV-MODE
AFV-MODE = Front panel AFV mode
"0" to set front panel switching buttons in audio-follow-video state.
"1" to set front panel switching buttons in their previous state audio breakaway.