Owner manual

VP-4x4K - Overview 5
# Feature Function
1 POWER Switch Illuminated switch for turning the unit ON or OFF
2 IR Receiver Signals from the remote control transmitter illuminate
the LED
3 SELECTOR
Buttons
OUT Select the output to which the input is switched
IN Select the input to switch to the output
When a signal is detected, the input button illuminates
in green
The SELECTOR IN and OUT buttons also store/recall the
input/output configurations (see Section
6.8)
4 ALL Button Pressing ALL before pressing an input button
connects that input to all outputs
For example, press ALL and then Input button # 2 to
connect input # 2 to all the outputs
5 OFF Button Pressing OFF after pressing an output button
disconnects that output from the inputs. To disconnect
all the outputs, press the ALL button and then the OFF
button
6 AFV Button When illuminated, the audio channels follow the video
channels. The button is illuminated when the AFV
mode is selected
If the AUDIO differs from the VIDEO, the TAKE button will
flash, and you have to press the TAKE button to confirm
the modification
7 VID Button When illuminated, actions relate to video
The VID button is illuminated when in breakaway mode
and actions relate to video
8 AUD Button When illuminated, actions relate to audio
The AUD button is illuminated when in breakaway mode
and actions relate to audio
9 STO Button Pressing STO (STORE) followed by an output or an
input button stores the current setting
Press the STO and LOCK buttons simultaneously to set
the delay time (see Section
6.3)
For example, press STO and then the Output button # 3 to
store in Setup # 3
10 LOCK Button Disengages the front panel switches
11 RCL Button Pressing RCL (RECALL) followed by an output or an
input button displays a stored setup
12 TAKE Button Pressing TAKE toggles the mode between the
CONFIRM mode and the AT ONCE mode (user
confirmation per action is unnecessary). When in
CONFIRM mode, actions are confirmed by pressing
the TAKE key
For example, press STO and then the Output button # 3 to
store in Setup # 3
When in the CONFIRM mode, the TAKE button illuminates
13 AUDIO GAIN Button Press to adjust the audio input or output gain (see
Section
6.2)
14 - Button Press to decrease the numerical value
By pressing the + or - buttons continuously, you can speed
up their response. For step-by-step response, press and
release these buttons as many times as needed
Gain, switching delay time and machine number