User manual

8
VP-505 - Operating the VP-505 3G HD-SDI to Video Scan Converter
5 Operating the VP-505 3G HD-SDI to Video
Scan Converter
The VP-505 is operated directly via the front panel buttons (see Section 5.1) and
via the OSD menu (see Section 5.2).
5.1 Using the Front Panel Buttons
During normal operation (without the OSD), the front panel buttons perform in the
following manner:
 MENU: Displays the OSD Main Menu (see Section 5.2.1). Press a second
time to close the OSD
 FREEZE: Freezes the display. Press a second time to unfreeze the display
 MENU and –: Press together to set the output to NTSC
 ENTER and FREEZE: Press together to set the output to PAL
5.2 Using the OSD
The OSD is used to set a variety of parameters.
When using the OSD, the front panel buttons operate in the following manner:
 MENU: Opens the OSD main menu (see Section 5.2.1). Press a second
time to close the OSD
 ENTER: Selects the highlighted menu item or parameter
 – : Steps up through the menu list or decrements the parameter value
 + : Steps down through the menu list or increments the parameter value
Note: After a period of 15 sec with no button activity, the OSD menu times-out
automatically.