User manual

6
VP-505 - Connecting the VP-505
4 Connecting the VP-505
Always switch off the power to each device before connecting it to your
VP-505. After connecting your VP-505, connect its power and then
switch on the power to each device.
To connect the VP-505 as illustrated in the example in Figure 2:
1. Connect the SDI video source (for example, a digital camera) to the SDI IN
BNC connector.
2. Connect the SDI OUT BNC connector to the SDI acceptor (for example, an
SDI display).
3. Connect the LEFT and RIGHT AUDIO OUT RCA connectors to the audio
acceptor (for example, a stereo audio amplifier).
4. Connect the VIDEO CV OUT BNC connector to the composite video
acceptor (for example, a composite video display).
5. Connect the VIDEO Y/C OUT 4-pin connector to a Y/C (s-Video) acceptor
(for example, an s-Video recorder).
6. Connect the power adapter to the 5V DC power socket and to the mains
electricity (not shown in the illustration).
i