User manual

VP-553 - Using the Embedded Web Pages
33
33
Figure 20: Switching Page – HDMI input Window
When selecting the HDBT input, you can rename the input, set the embedded
audio volume, set the HDCP to ON or OFF, and set the HDBT IR OUT signal route
(see Section 7.2.1):
Figure 21: Switching Page – HDBT input Window
For HDBT inputs, when a Kramer SID-X2N unit is connected to the HDBT input,
click the SID-X2N icon (see Figure 22) to open the SID-X2N setup window (see
Figure 23).