User manual

40
VP-553 - Using the Embedded Web Pages
7.4.1 Firmware Upgrade
You can upgrade the firmware via the Device Settings page. To do so:
1. Choose the firmware file by clicking the Choose File button in the Firmware
upgrade line.
2 Click the Upgrade button.
The new firmware is uploaded:
Figure 31: The Device Settings Page – Uploading the New Firmware File
3 Make sure that the new version appears on the Web page lower left side:
Figure 32: The Device Settings Page – New Firmware Updated
7.4.2 Soft Factory Reset
Click the Soft Factory Reset button to reset all the device parameters except for the
IP Address. The following message appears: