User manual

VP-553 - The VP-553 RS-232 Communication Protocol
67
67
Command – LOCK-FP
Command Type – System
Command Name
Permission
Transparency
Set:
LOCK-FP
End User
-
Get:
LOCK-FP?
End User
-
Description
Syntax
Set:
Lock front panel
#LOCK-FP␠P1␍
Get :
Get front panel lock state
#LOCK-FP?␍
Response
nn@LOCK-FP␠P1␠ OK␍␊
Parameters
P1 (Off/On)– 0=Off; 1=On
Command – HDCP-MOD
Command Type – System
Command Name
Permission
Transparency
Set:
HDCP-MOD
Administrator
Public
Get:
HDCP-MOD?
End User
Public
Description
Syntax
Set:
Set HDCP mode
#HDCP-MOD ␠ P1,P2,P3 ␍
Get :
Get HDCP mode
#HDCP-MOD? ␠ P1,P2 ␍
Response
Set / Get : ~ nn@HDCP-MOD ␠ P1,P2,P3 ␍␊
Parameters
P1 (Input/Output) – 0=Input; 1=Output
P2 (Scaler number) – 1=Scaler1; 2=Scaler2
P3 (Status) – 0=Off; 1=On; 2=Follow In, 3=Follow Out
Response triggers
 Response is sent to the com port from which the Set (before execution) / Get command was
received
 Response is sent to all com ports after execution if HDCP-MOD was set any other external control
device (button press, device menu and similar) or genlock status changed
Notes
Set HDCP working mode on device input :
HDCP supported – HDCP_ON [default]
HDCP not supported – HDCP OFF
HDCP support changes following detected sink – MIRROR OUTPUT