User manual

VP-553 - The VP-553 RS-232 Communication Protocol
69
69
Command – W-FRZ
Command Type – Video
Command Name
Permission
Transparency
Set:
W-FRZ
End User
-
Get:
W-FRZ?
End User
-
Description
Syntax
Set:
Set freeze video on output
# W-FRZ ␠ P1,P2 ␍
Get :
Get freeze on output status
# W-FRZ? ␠ P1 ␍
Response
Set / Get : ~ nn@ W-FRZ ␠ P1,P2 ␍␊
Parameters
P1 (Scaler number) – 1=Scaler1; 2=Scaler2
P2 (Off/On) – 0=Off; 1=On
Command – AUD-LVL
Command Type – Audio
Command Name
Permission
Transparency
Set:
AUD-LVL
End User
-
Get:
AUD-LVL?
End User
-
Description
Syntax
Set:
Set audio level in specific amplifier stage
#AUD-LVL␠ P1,P2,P3 ␍
Get :
Get audio level in specific amplifier stage
#AUD-LVL?␠ P1,P2 ␍
Response
~nn@AUD-LVL␠ P1,P2 ␍␊
Parameters
P1 (Input/Output)– 0=Input; 1=Output
P2 (Input/Output number valid according to the selected Input/Output according to P1) – video
inputs=(0~11); audio inputs=(0~12);audio outputs (– see Section 9.3.1)
P3 – 0~100
Command – MIX
Command Type – Audio
Command Name
Permission
Transparency
Set:
MIX
End User
-
Get:
MIX?
End User
-
Description
Syntax
Set:
Set audio MIX
#MIX␠ P1,P2 ␍
Get :
Get audio MIX
#MIX? ␠ P1 ␍
Response
~nn@MIX␠ channel, mix_mode ␍␊
Parameters
P1 (Output number) – 0=Audio out; 1=Scaler 1; 2=Scaler2
P2 (Off/On)– 0=Off; 1=On