User manual

74
VP-553 - The VP-553 RS-232 Communication Protocol
Command – Microphone Gain
Command Type – [Audio]
Command Name
Permission
Transparency
Set:
MIC-GAIN
End User
Public
Get:
MIC-GAIN?
End User
Public
Description
Syntax
Set:
Set the microphone gain
# MIC-GAIN ␠ P1,P2 ␍
Get :
Get the microphone gain
# MIC-GAIN? ␠ P1 ␍
Response
Set / Get : ~ nn @ MIC-GAIN ␠ P1,P2 ␍␊
Parameters
P1 (Input number, for VP-553 always 0) = 0
P2 (level) – 0 to 100
Response Triggers
Response is sent to the com port from which the Set (before execution) / Get command was received
After execution, response is sent to all com ports if CMD-NAME was set any other external control
device (button press, device menu and similar) or genlock status was changed
Notes
Sets the Microphone input audio gain
Command – DIP switch status
Command Type – [Machine]
Command Name
Permission
Transparency
Set:
End User
Public
Get:
DPSW-STATUS?
End User
Public
Description
Syntax
Set:
Get :
Get the DIP-switch status
# DPSW-STATUS? ␠ P1 ␍
Response
Get : ~ nn @ DPSW-STATUS ␠ P2 ␍␊
Parameters
P1 –0=SW 0;… 2=SW2
P2 (Off/On) – Off=0, On=1
Response Triggers
Response is sent to the com port from which the Set (before execution) / Get command was received
After execution, response is sent to all com ports if CMD-NAME was set any other external control
device (button press, device menu and similar) or genlock status was changed
Notes
Gets the DIP status for the selected DIP switch