User manual

Defining the VP-200XLTHD XGA Line Amp/CAT 5 Transmitter
7
Table 1: VP-200XLTHD XGA Line Amp/CAT 5 Transmitter Features
# Feature Function
1
12V DC
Connect to the 12V DC power adapter
2 LINE OUT RJ-45 Connector Connect to
1
the LINE IN RJ-45 connector on the TP-120
2
or the VP-5R
3 XGA OUT 15-pin HD Connector Connect to the XGA acceptor
4 INPUT 15-pin HD Connector Connect to the XGA source
5 LEVEL trimmer Turn to adjust
3
the output signal level
6 EQ. trimmer Turn to adjust
3
the video EQ. (equalization) compensation
7 ON LED Lights when the VP-200XLTHD receives power
Figure 2 and Table 2 define the VP-200XLTHD.
Figure 2: VP-200XLTHD XGA Line Amp/CAT 5 Transmitter Underside
Table 2: VP-200XLTHD XGA Line Amp/CAT 5 Transmitter Underside Features
Switch Function
VS Switch Slide the switch downward to change the VS polarity to negative polarity
4
; slide the
switch upward to retain the polarity (default)
HS Switch Slide the switch downward to change the HS polarity to negative polarity
4
; slide the
switch upward to retain the polarity (default)
1 Using an STP CAT 5 cable with RJ-45 connectors at both ends (the pinout is defined in Table 7 and Figure 9)
2 Refer to the separate user manual: PT-110, PT-120, TP-120, WP-110 available at http://www.kramerelectronics.com
3 Insert a screwdriver into the hole and carefully rotate it, to trim the level
4 Downgoing syncs