Specifications

16
PAN
Jumps to the Zoom pan menu item and allows immediate
panning of a zoomed image using multi-directional switch.
AUTO
TRAK
Activates Auto Track for the analog RGB input
ASPECT
RATIO
Changes the aspect ratio of the output, by cycling between 3
different settings.
*SIZE
Jumps to the ‘Shrink’ menu item and allows immediate
adjustment of PIP size.
*POS
Jumps to the Shrink pos % menu item and allows immediate
adjustment of PIP position.
*LOCK
Sets Lock mode to Genlock.
This locks the unit’s output to the current Lock source.
See ‘Adjust outputs’ menu details.
*KEY
Enables keying – see ‘Adjust keyers’ menu.
(Key color defaults to black, so black foreground will disappear.)
*MIX
Sets Lock mode to Lock & Mix, to overlay onto the current Lock
source. Use with the KEY and FADE buttons for more flexibility.
A 2
nd
press will swap foreground and background.
See ‘Adjust outputs’ menu details.
*FADE
Fades out the current image – fades back in on next press.
*PIP
Activate picture-in-picture mode.
(Activates and deactivates the Shrink value in the ‘Adjust
windows’ menu in the OSD)
RESTORE
Hold in briefly to restore to last-saved (power-on) defaults – this
is useful to ‘escape’ from non-displayable configurations. Hold in
for longer (two beeps) to perform a Factory reset of user settings.
STANDBY
Hold in to put the unit into Standby (power-save) mode.
Hold in briefly to come out of Standby mode.
*These buttons are included on VP-704XL only
4.4 Special button combinations and functions
Various button combinations are available to perform certain functions:
These buttons combinations only work when the unit is switched
on and active i.e. with the STANDBY/ON LED off.
4.4.1 Storing the current settings
Press and hold the centre ‘MENU’ button for a few seconds. This will store all
settings in non-volatile memory so that they will be used as the default settings
when next powered on.