Specifications

19
5.5 Video outputs
The CV and YC outputs always function simultaneously and can be set to either
standard NTSC or PAL – see ‘Adjust outputs’ for more information.
The VP-701XL and VP-703XL both have dual CV/YC outputs – all four connections
are active simultaneously, showing identical images.
The VP-704XL also has a YPbPr output (that can also be switched to RGsB) on 3
BNC connectors.
5.6 RS232 control
All units have an RS232 connector, however the VP-701XL does not support
control over this port – it is purely there for updating firmware.
The VP-703XL and VP-704XL can both be controlled using a serial protocol as
detailed later in this manual (currently, no application control is available).