Specifications

24
This menu item allows you to select the type of signal output your unit will provide.
Types of output vary depending on the resolution selected and include various
types of component signals Y/R-Y/B-Y or YPbPr, the full range of RGB type signals
RGBHV and RGsB (Sync on green).
*Not applicable for these units
This menu item is only available on certain units with an SDI output and when
locking to a CV or YC input. An internal de-jitter circuit ensures that the SDI output
has a low jitter over the full 10Hz to 100kHz range, even though the CV or YC input
may have a high jitter. However, this is not always compatible with a CV/YC output
where the colour sub-carrier should not be de-jittered and needs to follow a Lock
source’s input – hence it should be turned Off it the CV/YC outputs are going to be
used.
This menu item is only available when the Output resolution is set to PAL or NTSC.
With this you can change the output type to the PAL or NTSC standard with the
further option of changing the output to the additional PAL & NSTC standards such
as PAL-M or PAL-N. SECAM is also available as an output, provided the ‘Output
res’ is set to PAL / 50Hz.
Sets the value of the fixed background color, which is present when PIP is used
with no Lock source background displayed. This menu item is only available for
units with overlay, keying and fading abilities.
7.4 Items Associated with the
This menu group allows adjustment to be made to window specific parameters
such as the window source, its position, size and zoom level.
Adjust windows group
The source display screen allows the input source for the currently selected window
to be changed. The top line of the display shows the detected characteristics of
the signal. Valid Input sources match those available on the front of the unit
NTSC / 60Hz
Source [ YC1]
Adjust outputs
Optimize for SDI [On]
Adjust outputs
Out std [NTSC / PAL]
Adjust outputs
Back Y/U/V [ 16] [128] [128]