Specifications

29
sometimes 51%. Increasing the softness value will broaden the range of keyed
colors so that the keying of images varies depending on how close a color is to the
keyed-out range.
The Y Key invert changes the keying characteristics with respect to what colors of
the foreground image you wish to ‘key out’.
Setting it to Off will cause the colour range that’s defined to be removed - remove
the desired colours. Setting it to On will cause the colour range that’s defined to be
kept - key out all other colours.
The descriptions above behave identically on the remaining U Key Invert & V Key
Invert component versions. However they are directed at the U/B-Y (blue) colour
component and V/R-Y (red) colour components respectively. Adjustment and
effects are the same as explained above for Y Key Invert (brightness/grey-scale).
7.6 Items Associated with the
The ‘Adjust Sources’ menu group accesses the parameters associated with the
processing amplifiers used for each input (RGB, CV, YC, etc.). They allow you to
fine-tune an incoming signal to optimize its color, brightness or even sharpness.
Adjust sources group
Not all settings are available for all input types, and not all input types listed here
may be available on your unit.
It is recommended that you Store your settings once you’re happy with them in
readiness for future use.
This menu item selects the input connection for which you want to make
adjustments to. As in the image above, changes will only be made to the source
connected to RGB1. Once the selection has been made, all changes made using
the following operating parameters will only apply to the selected input.
Selection of a CV/YC source will reveal different menu items that
allow adjustments beyond those used for RGB sources. The
menu discussions that follow relate first to RGB sources, then to
CV / YC type sources.
Adjust keyers
Y Key invert [Off]
Source: RGB1
Source to adjust [RGB1]