Specifications

30
7.6.1 RGB Source Menu Items
Once the Autoset sense setting has been made, this menu item is accessed and
activated. The Autoset sense utility will then correct the pixel phase and then
position the Top Left portion of the image and the Bottom Right portion of the
image. Once complete it then resume inactive status.
This menu item allows manual positioning of the Top and Left portion of the image.
It is used to ensure that the input signal is captured correctly, eliminating any black
borders. These settings are often used to correct the position of a PC signal on an
input, or to eliminate any undesired noise at the top or bottom of a PAL or NTSC
video source.
This menu item allows manual positioning of the Bottom and Right portion of the
image. These settings are often used to correct the position of a PC signal on an
input, or to eliminate any undesired noise at the top or bottom of a PAL or NTSC
video source.
The following options are available:
Show
Freeze
Blue
Black
Remove
Since an image pixel is a very small element of the total image, it’s possible for
your unit’s Analog to Digital converters to wrongly sample the picture on the edge
of each pixel thereby losing image resolution and creating image noise. The Input
pixel phase adjustment allows you to change the position (from 0 to 31) where the
pixels are sampled, relative to the horizontal sync signal.
Source: RGB1
Input pixel phase [ 16]
Source: RGB1
On Source Loss [ 1]
Source: RGB1
BR size adj. [ 0] [ 0]
Source: RGB1
TL pos. adj. [ 0] [ 0]
Source: RGB1
Auto Track [Inactive]