Specifications

37
Normally, the user will examine the added features of each new
software release and determine if an update is worth doing in
their particular operation. The greater period of time between the
current date, and the date shown for the currently installed
software, the greater the likelihood that there are useful changes and
improvements present in the new release.
The TAC number is a unique identifier for the unit and is for future use.
This screen provides a quick and easy way to store all current operating
parameters. The unit will remember the set up you are currently using at the time of
data storage and also when you next apply power. To store the current settings,
press and release the control button.
In order for Autoset to work properly, it needs a sufficiently bright full-screen image
to examine. The sense level lets you change the brightness threshold for detection
of the screen edge between Low, Medium, High and V.high. Medium is the default
level, which is recommended for normal use (Windows-type images, etc.)
This parameter controls whether the ‘welcome’ screen is displayed or not on power
up for units with an on-screen display – it can be disabled as required. This is
useful when a unit is installed as part of an overall system.
When turned on, the previously explained Adjust resolutions menu structure is
exposed. The default condition is ‘Off’, to prevent accidental changes.
This menu item allows the adjustment of the serial baud rate used for RS-232
communications. The rate can be adjusted to 9600, 19200, 28800, 33600, 38800,
System
Push to store
System
Advanced Menus [Off]
System
RS232 baud rate [57600]
System
TAC# 27-56-12-93-28-33
System
Autoset sense [Medium]
System
OSD on power up [On]