Specifications

58
13 SPECIFICATIONS
See product front and rear diagrams for details of product I/O. Not all units in the
series have all the inputs and outputs listed here.
COMPUTER
INPUT:
Analog RGB/YPbPr on HD15 connectors into 75,
supporting RGBHV, RGsB, YPbPr, auto-terminating into
75
Digital sync (in RGBHV mode): TTL Level, 10K termination,
pos or negative
Analog sync (in RGsB, YPbPr, YUV modes): 0.3V negative.
RGB Level Range: 0.5-2.0 Vpp
Scan Rate Detection: automatic
PC Resolutions: any up to 2048x2048
HDTV Resolutions: any up to 1080p
Max horizontal scan rate: 150kHz
VIDEO INPUTS
FOR GENLOCK
PURPOSES (for
VP-704xl only):
Composite video on BNC connectors
s-Video (YC) on 4-Pin mini-DIN Connectors
Input impedance: 75
Television standards supported: NTSC and PAL
CV/YC sub-carrier lock range: +/- 200Hz (NTSC), +/- 250Hz
(PAL)
VIDEO OUTPUTS:
Composite Video 1Vpp on BNC connectors
S-Video (YC) 1Vpp on 4-pin mini-DIN connectors
CV/YC Video encoder: 8/10-bit Digital Output impedance 75
Television standards supported: NTSC and PAL
COMPUTER
OUTPUTS:
RGBHV loop
For VP-704xl only:
YPbPr (0.7V RGB / 1.0V sync-tip to white, approx. 0.4V DC
offset)
HDTV Resolutions: any up to 1080p
Vertical Refresh Rate: any to 250Hz
CONTROL
METHODS:
The unit can be controlled locally via the front panel buttons
and on-screen display (OSD), remotely via the RS-232
interface (not applicable for VP-701xl) using a D9 female
connector or again remotely via the Infrared remote using the
infra-red remote unit.
LOCKING/MIXING
(for VP-704xl only):
CV/YC SC/H phase adjustments: +/- 180 degrees (for units
with CV/YC output only)
Keyer: chromakey (YUV) or lumakey (Y)
Mixer: PC / Video, foreground/background swappable
PIP: variable window size & position single-button enabling
(Not all locking/mixing combinations are available: you
cannot overlay one CV or YC source over a different CV or
YC source, or one RGB/YUV source over another RGB/YUV
source you are restricted to overlaying CV/YC over
RGB/YUV, or RGB/YUV over CV/YC (the exception is where
you can overlay one source over itself).