User manual

VP-724xl Communication Protocol
53
Control
Type
Function
Param
(for Set)
Function
Description
Comment
5 2 N/A Load Gamma/Color - Cinema
5 3 N/A Load Gamma/Color - Nature
5 4 N/A Load Gamma/Color - User1
5 5 N/A Load Gamma/Color - User2
6: Set
7: Get
0 0~1 Power
0: Power Down
1: Power On
6: Set
7: Get
1 0~1 Freeze
0: Off
1: On
6: Set
7: Get
2 0~1 Blank
0: Off
1: On
6: Set
7: Get
3 0~1 Mute
0: Off
1: On
8 0 N/A
"Resolution/Refresh Rate" Or
"Video Stand"
Example:
"Y 8 0 CR"
return: "Z 8 0
1080i CR"
1: Set
2: Get
44 > 100 HT, H-Sync Cycle
1: Set
2: Get
45 > 0 HW, H-Sync Width
1: Set
2: Get
46 > 0 HS, Active Pixel Start
1: Set
2: Get
47 - HA, Active Pixel
1: Set
2: Get
44 > 100 HT, H-Sync Cycle
1: Set
2: Get
45 > 0 HW, H-Sync Width
1: Set
2: Get
46 > 0 HS, Active Pixel Start
1: Set
2: Get
47 - HA, Active Pixel
1: Set
2: Get
44 > 100 HT, H-Sync Cycle
1: Set
2: Get
45 > 0 HW, H-Sync Width
1. Setting Command
should be a reasonable
value
2. Getting Command return
the current group
parameter (refer to
command "Y 3 29 X" or "Y
4 29 " )
Version 2.42
and above
1: Set
2: Get
54 > 100 OCLK
1. Oclk = Param / 10 Mhz
2. Should be a reasonable
value
Version 2.42
and above
3: Set
4: Get
28 0~1 Enable OSD Timeout
0: Disable
1: Enable
Version 2.42
and above
3: Set
4: Get
29 0~2
Select Output Mode
Userdefined Parameter Group
0: Group 1
1: Group 2
2: Group 3
Version 2.42 -
Select which
group of User
Define Display
Mode to be
saved or loaded
3: Set
4: Get
30 0~2
Set the control way of Saving
Audio Volume / Treble / Bass
values
0: Master
1: Individual
2: Linked
Version 2.42
and above
6: Set
7: Get
4 0~1 Key Lock
0: Off
1: On