User manual

Front Panel
# Feature Function
4 HDMI Selects one of the HDMI sources (from 1 to 4)
5 USB Press to select the USB source
JPEG files on a USB memory stick, up to a maximum size of 2048x1536
6 COMP Selects one of the component video sources (from 1 to 4)
7 MODE
SELECT
BUTTONS
VIDEO
GROUP
Select the Video Group operation mode; within each group, select which input (from 1 to 4) to switch to
the output. The selected input button within each group is illuminated. If the AUDIO GROUP button is
also illuminated, the audio follows the video
When selected, this button illuminates
8 SCALER Select the Scaler mode: press an input button (1 of 21), to select the input to be scaled at the SCALED
OUTPUTS. The selected input button illuminates. If the MASTER AUDIO button is also illuminated, the
audio follows the video
9 LCD Status Display Displays the status
10 POWER Switch Illuminated switch for turning the unit ON or OFF
11 IR Receiver/LED Green when ON; red when OFF
OFF in this case means that the outputs and the front-panel are disabled
12 FREEZE Button Freezes the output video image
Applicable to the Scaler outputs only
13 PIP Button Selects the picture-in-picture function (see Section 6.2 )
14 MENU Button Displays the OSD Menu screen (or returns to the previous level in the OSD screen)
15 ENTER Button Moves to the next level in the OSD screen
Press for about 3 seconds to lock/unlock the front panel buttons
16 UP Button Moves up one step (in the same level) in the OSD screen
17 - Button Decreases the range by one step
18 DOWN Button Moves down one step (in the same level) in the OSD screen
19 + Button Increases the range by one step
20 OSD ON Button Activates/deactivates access to the OSD Menu
The OSD ON front panel button is activated (illuminated) by default, and pressing the MENU front panel button
(or the MENU key on the infrared remote control transmitter (see
Figure 22)) displays the OSD Menu. To
prevent OSD display, press the OSD ON front panel button (or the OSD key). The front panel button no longer
illuminates, and the front panel LCD now operates independently of the OSD (when the OSD is OFF, the LCD is
still operational)
21 USB Connector Connect to a USB drive to read JPEG files
8 VP-725N – Overview