User manual

VP-725N - Connecting the VP-725N Presentation Switcher/Scaler 13
 Up to four HDMI sources (for example, DVD players) to the HDMI
connectors
2. Connect the CV OUT BNC connector, and the UXGA OUT 15-pin HD
connector to the respective video inputs on the projector.
3. Connect the HDMI connector to an LCD display.
4. Connect the COMP OUTPUT BNC connectors: G/Y, B/Pb, and R/Pr to the
respective component video inputs on the LCD monitor.
5. Connect up to three SCALED OUTPUTS, as follows:
 Connect the RGBHV connectors (G/Y, B/Pb, R/Pr, H, and V) to the
RGBHV acceptor (for example, a projector)
 Connect the HDMI connector to the HDMI acceptor (for example, an
LCD display)
 Connect the UXGA connector to the UXGA acceptor, for example, a
monitor (not illustrated in
Figure 3)
6. Connect the power cord (not illustrated in
Figure 3).
We recommend that you use only the power cord that is supplied with this machine.
7. If required connect:
 A PC (see Section
5.3).
 The Ethernet port (see Section
5.4).