User manual

VP-725N - Connecting the VP-725N Presentation Switcher/Scaler 17
4. Select Internet Protocol (TCP/IP) and click the Properties Button (see
Figure 6).
Figure 6: Local Area Connection Properties Window
5. Select Use the following IP Address, and fill in the details as shown in
Figure 7.
This IP address is compatible with the factory default IP address of the unit.
Figure 7: Internet Protocol (TCP/IP) Properties Window
6. Click OK.
5.4.2 Connecting the ETHERNET Port via a Network Hub (Straight-
Through Cable)
You can connect the Ethernet port of the VP-725N to the Ethernet port on a
network hub or network router, via a straight-through cable with RJ-45 connectors.