User manual

18 VP-725N - Operating the VP-725N Presentation Switcher/Scaler
6 Operating the VP-725N Presentation
Switcher/Scaler
The VP-725N includes the following front panel buttons:
• A set of 21 INPUT SELECTOR buttons
• Video Group and Scaler Mode SELECT buttons
• A PIP button
• A FREEZE button
• A set of 7 OSD buttons: OSD ON, MENU, ENTER, -, +, UP, and DOWN
This section describes how to:
• Switch an input to an output (see Section
6.1)
• Use the PIP feature (see Section
6.2)
• Lock and unlock the front panel buttons (see Section
6.3)
• Freeze the image (see Section
6.4)
• Display a blank screen (see Section
6.5)
6.1 Switching an Input in the Video Group Mode/Scaler
Mode
The VP-725N can operate in two different modes:
• The Video Group mode, in which you can switch an input (from 1 to 4) to an
output in each of the five Video Groups: composite video, s-Video,
component video (RGB or YPbPr), HDMI and UXGA
• The Scaler mode, in which you can select one of the 21 input buttons to
switch to the scaled outputs
When the VP-725N is in use, both modes operate simultaneously, as well as
independently. That is, the Scaler output is available even when switching in the
Video Group mode, and visa versa.