User manual

VP-725N - Operating the VP-725N Presentation Switcher/Scaler 19
6.2 Understanding the PIP Feature
The Picture-in-Picture inserter (PIP) (see Section 7.1.2) is used to display video
and graphic sources simultaneously. It lets you display:
• An inserted video source (composite, s-Video) PIP over a graphic source
(HDMI or UXGA or component)
• An inserted graphic source PIP over a video source
When selecting a PIP source, the Presentation Switcher/Scaler automatically
recognizes and displays the selected graphic PIP source on any video source or the
selected video source on any graphic source (even if the input signal is not
connected. In this case the PIP appears over a blank screen.)
PIP Source
VIDEO GRAPHIC
Main Source CV YC VGA HDMI COMP
CV
No No Yes Yes Yes
YC
No No Yes Yes Yes
VGA
Yes Yes
No No No
HDMI
Yes Yes
No No No
COMP
Yes Yes
No No No
USB
Yes Yes
No No No
In this machine COMP is considered a graphic source even in the case where it is at video
resolutions.
Activate the PIP Feature by:
• Pressing the PIP front panel button
• Switching on the PIP functionality via the OSD Menu (see Section
7.1)
• Pressing the PIP key on the remote control transmitter (see Section
7.3)
Toggle between the PIP and screen source by:
• Pressing the SWAP key on the remote control transmitter (see Section
7.3)
Resize the PIP by:
• Using the OSD menu (see Section
7.1)
• Pressing the PIP Size key on the remote control transmitter (see Section
7.3)