K R A ME R E LE CT R O N IC S L T D .
Contents 1 Introduction 1 2 2.1 2.2 Getting Started Achieving the Best Performance Recycling Kramer Products 2 2 2 3 3.1 4 Overview Defining the VP-730 Presentation Switcher/Scaler Installing in a Rack 3 5 9 5 5.1 5.2 5.3 Connecting the VP-730 Connecting a PC Connecting the Balanced/Unbalanced Stereo Audio Input/Output Connecting the Digital S/PDIF Audio Input 10 13 14 14 6 6.1 6.2 6.3 6.
Figures Figure 1: VP-730 Presentation Switcher/Scaler Front Panel Figure 2: VP-730 Presentation Switcher/Scaler Rear Panel Figure 3: Connecting to the VP-730 Rear Panel Figure 4: Crossed Cable RS-232 Connection Figure 5: Straight Cable RS-232 Connection with a Null Modem Adapter Figure 6: Connecting the Balanced Stereo Audio Input/Output Figure 7: Connecting the Unbalanced Stereo Audio Input Figure 8: Connecting an Unbalanced Stereo Audio Acceptor to the Balanced Output Figure 9: Connecting the Digital S/PD
1 Introduction Welcome to Kramer Electronics! Since 1981, Kramer Electronics has been providing a world of unique, creative, and affordable solutions to the vast range of problems that confront video, audio, presentation, and broadcasting professionals on a daily basis.
2 Getting Started We recommend that you: • Unpack the equipment carefully and save the original box and packaging materials for possible future shipment • Review the contents of this user manual • Use Kramer high performance high resolution cables • Use only the power cord that is supplied with this machine i 2.1 Go to http://www.kramerelectronics.com to check for up-to-date user manuals, application programs, and to check if firmware upgrades are available (where appropriate).
3 Overview The Kramer VP-730 is a 9-input Proscale™ Presentation Switcher / Scaler. Each audio input can accept balanced stereo audio or digital S/PDIF audio. The VP-730 has a balanced stereo audio output and a digital S/PDIF audio output.
output resolution with selectable refresh rates • Multiple aspect ratio selections • Companion AFV (audio-follow-video) for every analog video input • Embedded audio on the two HDMI inputs and output The embedded audio feature is not available for the RGB resolutions 1920x1200 and 1920x1080.
In addition, the VP-730: • Includes non-volatile memory that retains the last settings, after switching the power off and then on again • Digitally reprocesses the signal to correct mastering errors and regenerates the video at a higher line and pixel rate format, providing native-resolution video for LCD, DLP and plasma displays • Is specifically designed to improve video quality by reducing chroma noise • Includes numerous filters and algorithms for eliminating picture artifacts • Scales and zoom
6 Figure 1: VP-730 Presentation Switcher/Scaler Front Panel # 1 Feature IR Receiver / LED Function Lights red when the unit accepts IR remote commands 2 UNIVERSAL INPUT Selector Buttons Press to select the composite video / s-Video / component video source and the appropriate audio source (from 1 to 2) 3 4 5 6 INPUT Selector Buttons (illuminate when selected) i PC 1 Press to select the UXGA source 1 and the appropriate audio source (from 1 to 4) HDMI 1 Press to select the HDMI source 1 HDMI 2
VP-730 – Overview # 14 15 Feature Button Function Increases the range by one step in the OSD screen Increases the volume level, when not in the OSD menu Button Moves down one step (in the same level) in the OSD screen, or moves to the next slide when running a slideshow (see Section 7.7.
8 Figure 2: VP-730 Presentation Switcher/Scaler Rear Panel # 19 20 21 Feature Function UNIV.
4 Installing in a Rack This section provides instructions for rack mounting the unit.
5 Connecting the VP-730 i Always switch off the power to each device before connecting it to your VP-730. After connecting your VP-730, connect its power and then switch on the power to each device. To connect the VP-730 as illustrated in the example in Figure 3, do the following: 1. Connect the video sources: A component video source (for example, a DVD player) to the UNIV.
3.
Figure 3: Connecting to the VP-730 Rear Panel 12 VP-730 - Connecting the VP-730
5.1 Connecting a PC You can connect to the unit via a crossed RS-232 connection, using for example, a PC. A crossed cable or null-modem is required as shown in method A and B respectively. If a shielded cable is used, connect the shield to pin 5. Method A (Figure 4)—Connect the RS-232 9-pin D-sub port on the unit via a crossed cable (only pin 2 to pin 3, pin 3 to pin 2, and pin 5 to pin 5 need be connected) to the RS-232 9-pin D-sub port on the PC. Note: There is no need to connect any other pins.
5.2 Connecting the Balanced/Unbalanced Stereo Audio Input/Output Figure 6: Connecting the Balanced Stereo Audio Input/Output Figure 7: Connecting the Unbalanced Stereo Audio Input Figure 8: Connecting an Unbalanced Stereo Audio Acceptor to the Balanced Output 5.
6 Presentation Switcher / Scaler Buttons The VP-730 includes the following front panel buttons: 6.1 • Nine INPUT selector buttons • A PIP button • BLANK and FREEZE buttons • Six OSD navigation buttons • A RESET TO XGA/720p button • A PANEL LOCK button Switching an Input Each INPUT SELECTOR button can be used to select the source. When selected, the button illuminates. You can switch seamlessly between each input that is connected to a source by pressing the appropriate INPUT SELECTOR button.
6.2 The PIP Button Feature The Picture-in-Picture inserter (PIP) uses K-IIT XL™ image insertion technology to present video and graphic sources simultaneously so that you can display: • An inserted video source PIP over a graphic source background • An inserted graphic source PIP over a video source background VIDEO SOURCE – can be composite or s-Video GRAPHIC SOURCE – can be HDMI, UXGA or component For example, you can show a live video window on top of a graphic background and vice versa.
6.2.2 Selecting the PIP Source To easily select the PIP source, press and hold the PIP front panel button while pressing the input button of the required PIP source. For example, to select PC 2 as the graphic PIP source over a video background, press the PIP front panel button while pressing the PC 2 front panel button. To select the PIP source using the IR remote controller, press the desired PIP source on the remote controller.
To replace a PIP source in the same category (for example, changing the PIP source from HDMI 2 to HDMI 1), press the required PIP Source on the remote control transmitter and the PIP display will change accordingly. i 6.2.3 When attempting to select a PIP source of the same category as the background source (for example, video on video, which is not compliant with the table on Page 19), a message is displayed, “Unavailable Operation”.
PIP Source Appearance Availability USB* USB HDMI 2 HDMI 1 HDMI 1 HDMI 1 PC 4 (VGA 4 PC 4 (VGA 4 PC 3 (VGA 3) PC 3 (VGA 3) PC 2 (VGA 2) PC 2 (VGA 2) Comp PC 1 (VGA 1) Comp YC YC Video Video Comp Comp YC YC Input 1 Input 2 Video Input 2 Video Input 1 Main Source PC 1 (VGA 1) PIP Source
6.4 The Infrared Remote Control Transmitter You can control the VP-730 remotely from the infrared remote control transmitter which is powered by two AAA size 1.5V DC batteries. The IR remote control transmitter has a range of up to 15 meters and delivers instantaneous results i The front panel UNIVERSAL INPUT selector buttons IN 1 and IN 2 are named Input 1 and Input 2, respectively, on the IR remote control transmitter.
7 Configuring the VP-730 via the OSD MENU Screens The VP-730 uses an on-screen display (OSD) menu for system configuration. The menu appears as an overlay over any images that are output from the VP-730. There are eight sub-menus that are used to configure the VP-730. You can activate and navigate these menus from the front panel buttons, or from the IR remote control.
7.
7.1.1 Setting Function Auto image Assesses the image and improves the quality accordingly, by automatically adjusting the phase, frequency and position Default Reading JPEG Files You can read the JPEG files via the USB input. The JPEG files can be used to display a JPEG image, download a new Logo or background (see Page 33) or create a slideshow (see Section 7.7.1). To read JPEG files: 1.
7.2 The Picture Screen The Brightness, Contrast, Color and Hue picture settings are saved individually for each input (except USB).
7.
Setting Function Default Zoom Set the Zoom: 100%, 150%, 200%, 225%, 250%, 275%, 300%, 325%, 350%, 375%, 400% or Custom 100% Custom Zoom Set the Zoom: From 100% to 400% 7.3.1 Zoom H-Pan 0 to 31 16 Zoom V-Pan 0 to 31 16 HQV Color Setting Set the color saturation: adjust RGB and CMY (Cyan, Magenta and Yellow) individually (-100 to 100) Selecting the Correct Aspect Ratio You can configure the aspect ratio of any output image to fit your application.
7.4 The PIP Screen Figure 17: PIP Screen Setting Function Default On/Off Activate/deactivate the PIP feature: On/Off Off For a USB source with the PIP enabled, the maximum output image size is 960 horizontal pixels Type Source Select the PIP type: Picture-In-Picture, Picture + Picture or Split (see Section 6.
7.
7.
7.7 The Setup Screen Figure 20: Setup Screen Setting Function Save Saves up to eight profiles from 1 to 8 Default Recall Recalls a profile from 1 to 8 Slideshow Set the speed for the slide show to Min, Low, Mid, Long, Max or Off (see Section 7.7.1) Min Frame Lock Locks the vertical refresh rate of the output to that of the input. Set to On or Off. Off Note that seamless switching is not possible when working in the Frame Lock mode unless all sources are frame synchronized.
7.7.1 Setting Function HDMI Input HDCP Set to On or Off for each HDMI input HDCP support can be enabled (On) or disabled (Off) for each of the HDMI inputs, allowing the source to transmit a non-HDCP signal if required (for example, when working with a Mac computer) Default The Slideshow Feature The VP-730 lets you run a slideshow via the USB input and set the slideshow speed via the slideshow feature. To prepare a slideshow: 1. Load the slideshow JPEG images to a USB memory stick.
7.8 The Advanced Setup Screen Figure 21: Advanced Setup Screen The Mode Set functions define the desired working resolution and refresh rate when the system cannot distinguish between similar resolutions (for example, resolutions that have the same number of lines can be defined to identify refresh rate values.
7.8.2 The Misc Screen functions Figure 22: Misc Screen Setting Function Default Logo Select On, Off or Custom Choose ON for the start up logo to appear on the screen Choose OFF for it not to appear Set to Custom to download a custom Logo (Flash ROM).
Setting Function Default Background Select Blue, Black, Custom or Disable Analog Sync to set the background screen color if an input without a signal is selected Default Selecting Custom will automatically bring up a custom (captured) screen image, that can be obtained via the Capture function or downloaded via USB (Logo Download) Selecting Disable Analog Sync will cause the output SYNC to turn to off if an output is not connected for over 2 minutes for better energy efficiency Save Lock Select On or
7.8.
7.8.
Figure 25 illustrates horizontal and vertical sync pulse width, timing and active video area for a typical frame of video. Figure 25: Active Video Functions 7.9 The Info Screen From the Information screen (see Figure 26), you can verify the main source, PIP source, the output resolution, the SYNC mode, as well as the firmware revision and the audio board firmware version (for example, 2.
8 Using Text Overlay The text overlay feature is accessed via the Application Program (AP). Running this AP with the PC connected to the VP-730 lets you display text over the screen, with features including text color and speed, transparency, text position and repetition. Current text overlay settings can be saved and loaded to the AP.
Feature Function Parameter Setting Area Text Color Dropdown Box Select the Text color Background Color Dropdown Box Set the text background color Transparency Dropdown Box Select On for a transparent background or Off for a nontransparent background Display Height Check Box Set the thickness of the background stripe (72 or 36) Text Position – VPosition Set the vertical position of the text background on the display screen (Top, Center or Bottom) Communication Interface Area Connect/Disconnect C
9 Audio Flash Memory Upgrade The VP-730 audio firmware is located in FLASH memory, which lets you upgrade to the latest Kramer firmware version in minutes! Upgrade should be carried out by skilled technical personnel. Failure to upgrade correctly will result in the malfunction of the machine The process involves: • • Downloading from the Internet Connecting the PC to the AUDIO PROG. terminal block connector (Section 9.2) • 9.
9.2 Connecting the PC to the RS-232 Port Before installing the latest Kramer audio firmware version on a VP-730 unit, do the following: 1. Connect the PC to the AUDIO PROG. terminal block connector, as defined below: RS-232 PINOUT 9 8 7 6 GND Rx Tx 1 To this PIN on the 9-pin D-sub Connector Tx PIN 2 Rx PIN 3 GND PIN 5 2. Push the AUDIO PROG. button using a small screwdriver. 3. Switch the unit ON. i 9.
2. After a few seconds, the Splash screen is replaced by the “Atmel – Flip” window: Figure 29: Atmel – Flip Window 3. Press the keyboard shortcut key F2 (or select the “Select” command from the Device menu, or press the integrated circuit icon in the upper right corner of the window). The “Device Selection” window appears: Figure 30: Device Selection Window 4.
AT89C51RD2 T89C51RD2 Figure 31: Selecting the Device Window 5. Click OK and select “Load Hex” from the File menu.
6. The Open File window opens. Select the correct HEX file that contains the updated version of the firmware for VP-730 (for example 44M_V1p2.hex) and click Open. 7. Press the keyboard shortcut key F3 (or select the “Communication / RS232” command from the Settings menu, or press the keys: Alt SCR). The “RS232” window appears. Change the COM port according to the configuration of your computer and select the 9600 baud rate: Figure 33: RS-232 Window 8. Click Connect.
9. Click Run. After each stage of the operation is completed, the check-box for that stage becomes colored green. See also the blue progress indicator on the status bar When the operation is completed, all 4 check-boxes will be colored green and the status bar message: Memory Verify Pass appears: If an error message: “Not Finished” shows, click Run again Figure 35: Atmel – Flip Window (Operation Completed) 10. Close the “Atmel – Flip” window. 11. Disconnect the power on the VP-730. 12.
10 Technical Specifications INPUTS: 2 x universal Y/CV, Pb/C, Pr (composite, s-Video and component) 1 Vpp/75Ω on BNC connectors; 4 x PC (computer graphics) on 15-pin HD connectors (VGA through UXGA) 2 x HDMI connectors 1 x USB connector For each universal and PC input there is a corresponding balanced stereo audio (+4dBu nominal) or digital S/PDIF input on 5-pin terminal blocks OUTPUTS: 1 HDMI connector 2 x PC (computer graphics) on 15-pin HD connectors 1 balanced audio stereo output on a 5-pin termina
Technical Specifications of the RGBHV / RGBS (PC) / RGsB (PC) Input Signal Resolution Vertical Frequency (Hz) 640x480 60 640x480 67 640x480 Notes Resolution Vertical Frequency (Hz) Notes 1152x870 75 Mac21 1152x900 66 Sun 72 1152x900 76 Sun 640x480 75 1280x720 60 640x480 85 1280x800 60 720x400 70 1280x960 60 720x400 85 1280x960 85 800x600 56 1280x768 60 800x600 60 1280x1024 60 800x600 72 1280x1024 75 800x600 75 1280x1024 76 800x600 85 1280x1024 85 832x
Technical Specifications of the Y/C, Video Signal Standard NTSC, NTSC4.
Supported Output Resolutions Resolution Vertical Frequency (Hz) 640x480 60 640x480 75 800x600 50 800x600 60 800x600 75 1024x768 50 1024x768 60 1024x768 75 1280x720 60 1280x768 50 1280x768 60 1280x800 60 1280x1024 50 1280x1024 60 1280x1024 75 1366x768 50 1366x768 60 1400x1050 50 1400x1050 60 1600x1200 50 1600x1200 60 1920x1080 60 1920x1200 60 1680x1050 60 1080i 60 1080i 50 720p 60 720p 50 480p 60 576p 50 1080p 50 1080p 60 1080p 24Hz 480P 59
11 VP-730 Communication Protocol Serial Configuration: Baud rate: 9600 (Bits per second) Data bits: 8bits Parity: None Stop bits: 1bit Communication confirmation: Send: CR Reply: CR> Set Command: Send: YControl_TypeFunctionParamCR Reply: ZControl_TypeFunctionParamCR> Get Command: Send: YControl_TypeFunctionCR Reply: ZControl_TypeFunctionParamCR> Example: set Input 1 Source Type to Component Send: Y010CR Reply: Z010CR> Example: get current Input 1 Source Type Send: Y11CR Reply: Z1
Control Type Function Parameter Set Get Description 0 1 0 0: Input 1 1: Input 2 2: VGA 1 3: VGA 2 4: VGA 3 5: VGA 4 6: HDMI 1 7: HDMI 2 8: USB 0 1 1 0: Component 1: YC 2: Video Input 1 Source Type 0 1 2 0: Component 1: YC 2: Video Input 2 Source Type 0 1 3 N/A N/A 0 1 4 N/A N/A 5 0: Auto 1: RGB 2: YUV Input Color Format Input Video Standard 0 1 Input Source 0 1 6 0: Auto 1: NTSC 2: PAL 3: PAL-M 4: PAL-N 5: NTSC 4.
Control Type Function Parameter Set Get Description 2: Medium 3: High 0 1 20 0: Off 1: Low 2: Medium 3: High Picture Mosquito NR 0 1 21 0: Off 1: On Picture Block NR Picture Detail Enhancement 0 1 22 0: Off 1: Low 2: Medium 3: High 0 1 23 0: Off 1: Low 2: High Picture Luma Transition Enhance 0 1 24 0: Off 1: Low 2: High Picture Chroma Transition Enhance 25 0 : Native HDMI 1 : 640x480@60Hz 2 : 640x480@75Hz 3 : 800x600@50Hz 4 : 800x600@60Hz 5 : 800x600@75Hz 6 : 1024x768@50Hz 7 : 1
Control Type Function Parameter Set Get Description 33: 1080p@24Hz 34: 480P@59.94Hz 35: 720P@59.94Hz 36: 1080i@59.94Hz 37: 1080P@23.98Hz 38: 1080P@29.97Hz 39: 1080P@59.
Control Type Function Parameter Set Get Description 0 1 39 0: 1/25 1: 1/16 2: 1/9 3: 1/4 4: Custom 0 1 40 0 ~ 128 PIP H-Position 0 1 41 0 ~ 128 PIP V-Position 0 1 42 1 ~ 256 PIP H-Size 0 1 43 1 ~ 256 PIP V-Size PIP Frame PIP Size 0 1 44 0: Off 1: On 0 1 45 0: Red 1: Green 2: Blue PIP Frame Color 0 1 46 0: Analog 1: S/PDIF Audio Input Type 0 1 47 -22~0~+22 Audio Input Volume 0 1 48 -100~24 Audio Output Volume 0 1 49 -36~0~+36 Audio Bass 0 1 50 -36~0~
Control Type Function Parameter Set Get Description 0 1 67 -2000~2000 Geometry Diagonal Projection – Bottom Right V 0 - 68 N/A Geometry Diagonal Projection – Reset 0 1 69 -20 ~ 20 Geometry Pincushion/Barrel 0 1 70 -180 ~ 180 Geometry Rotation 0 - 71 N/A Geometry Reset all 72 0: Profile 1 1: Profile 2 2: Profile 3 3: Profile 4 4: Profile 5 5: Profile 6 6: Profile 7 7: Profile 8 Save Setting Recall Setting 0 - 0 - 73 0: Profile 1 1: Profile 2 2: Profile 3 3: Profile 4 4: Pr
Control Type Function Parameter Set Get Description 2: Custom 3: Disable Analog Sync 0 1 85 0: Off 1: On Save Lock 0 1 86 0: Off 1: On Input Lock Blank key function 0 1 87 0: Blank & Mute 1: Blank 2: Mute 0 1 88 0: Freeze & Mute 1: Freeze 2: Mute Freeze key function 0 1 89 0: Off 1: On Freeze 0 1 90 0: Off 1: On Blank Power 0 1 91 0: Off 1: On 0 - 92 N/A Info 0 - 93 N/A Menu 0 - 94 N/A Top 0 - 95 N/A Down 0 - 96 N/A Left 0 - 97 N/A Right 0 -
Control Type Function Parameter Set Get Description 18: 1024x800 84 Sun 19: 1152x864 75 20: 1152x870 75 Mac21 21: 1152x900 66 Sun 22: 1152x900 76 Sun 23: 1280x960 60 24: 1280x960 85 25: 1280x768 60 26: 1280x1024 60 27: 1280x1024 75 28: 1280x1024 76 Sun 29: 1280x1024 85 30: 1400x1050 60 31: 1400x1050 75 32: 1600x1200 60 33: 1680x1050 60 34: 1080i 60 35: 1080i 50 36: 1080p 60 37: 1080p 50 38: 720p 60 39: 720p 50 40: 480i 41: 480p 42: 576i 43: 576p 44: 1280x800 60 (Reduced blanking) 45: 1920x1200 60 46: 1920
Control Type Function Parameter Set Get Description 104: PAL-N 105: NTSC 4.
Control Type Function Parameter Set Get Description 0 1 105 512~3071 Advance Input Mode: HT 0 1 106 32~(HS-48) Advance Input Mode: HW 0 1 107 80~(HT-HA-12) Advance Input Mode: HS 0 1 108 640~1920 <= (HT-92) Advance Input Mode: HA 0 1 109 0: Negative polarity 1: Positive polarity Advance Input Mode: HP 0 1 110 384~2047 Advance Input Mode: VT 0 1 111 2~(HS-13) Advance Input Mode: VW 0 1 112 15~(VT-VA-1) Advance Input Mode: VS 0 1 113 480~1200 <= (VT-16) Advance In
Control Type Function Parameter Set Get Description <= (HT-92) 0 1 123 0: Negative polarity 1: Positive polarity Advance Output Mode: HP 0 1 124 384~2047 Advance Output Mode: VT 0 1 125 2~(HS-13) Advance Output Mode: VW 0 1 126 15~(VT-VA-1) Advance Output Mode: VS 0 1 127 480~1200 <= (VT-16) Advance Output Mode: VA 0 1 128 0: Negative polarity 1: Positive polarity Advance Output Mode: VP 0 1 129 25 < OCLK < 165 Advance Output Mode: OCLK(Integer) 0 1 130 25 < OCLK < 1
Control Type Function Parameter Set Get Description 0 1 150 -100 ~ 100 Blue Saturation 0 1 151 -100 ~ 100 Cyan Saturation 0 1 152 -100 ~ 100 Magenta Saturation 0 1 153 -100 ~ 100 Yellow Saturation EDID EEPROM write protect 0 1 154 0: Off 1: On 0 1 155 0: Off 1: On HDMI1 Hot Plug 0 1 156 0: Off 1: On HDMI2 Hot Plug 157 0 : Input 1 1 : Input 2 2 : VGA 1 3 : VGA 2 4 : VGA 3 5 : VGA 4 6 : HDMI 1 HDMI1 Audio Input HDMI2 Audio Input 0 1 0 1 158 0 : Input 1 1 : Input 2
For the latest information on our products and a list of Kramer distributors, visit our Web site where updates to this user manual may be found. We welcome your questions, comments, and feedback. Web site: www.kramerelectronics.com E-mail: info@kramerel.
