Instruction Manual

KRAMER: SIMPLE CREATIVE TECHNOLOGY
Operating the VS-169TP 16x9 CAT 5 Matrix Switcher
24
9.2 The STATUS 7-Segment Display
During normal operation, the STATUS display shows which inputs (UXGA,
AUDIO and/or RS-232) are switched to which outputs, as illustrated in
Figure 13
:
0
0
0 0
0
0
0
LL000
0
1
0 1 0000
0
0
0
0
0
0 1 0 1 0000
1 3 4 7
8
8
8
-652
1
6
8 3 5881
1
3
4
7
8
1
6
8 3 5881
Figure 13: 7-segment Display During Normal Operation
Figure 14 shows an example of the display immediately after switching on
the power:
KRAMER
UXGA
16in 8+1out Twisted Pairs MATRIX
STEREO AUDIO FULL DUPLEX RS-232-
-
-
ELECTRONICS,Ltd
VS-169TP/Rev
1 . 0
Figure 14: 7-segment Display Following Power ON
9.3 Switching an Input to an Output
To switch an input to an output:
1. Press the required OUT button from 1 to 8 or the L-L (local, on the
display).
The input under the selected output on the IN 7-segment display blinks.
2. Press an IN button to select the input to switch to the output.
The selected input number appears on the 7-segment display.
Incomplete operations on the VS-169TP timeout after 25 seconds
9.3.1 Switching one Input to all Outputs
To switch one input to all the outputs (in the AT ONCE mode):
1. Press the ALL button.
The MATRIX STATUS display shows the three sets of digits
1
1 Each representing the present input number for that respective output
in the
follow mode blinking simultaneously. In the breakaway mode, only the