User Manual

Flash Memory Upgrade
9
6.3 Upgrading Firmware
Follow these steps to upgrade the firmware:
1. Double click the desktop icon: “Shortcut to FLIP.EXE”.
The Splash screen appears as follows:
Figure 7: Splash Screen
2. After a few seconds, the Splash screen is replaced by the “Atmel – Flip” window:
Figure 8: Atmel – Flip Window
3. Press the keyboard shortcut key F2 (or select the “Select” command from the
Device menu, or press the integrated circuit icon in the upper right corner of
the window). The “Device Selection” window appears:
Figure 9: Device Selection Window