Kramer Electronics, Ltd.
Contents Contents 1 2 2.1 3 4 5 5.1 6 6.1 6.
Introduction 1 Introduction Welcome to Kramer Electronics! Since 1981, Kramer Electronics has been providing a world of unique, creative, and affordable solutions to the vast range of problems that confront the video, audio, presentation, and broadcasting professional on a daily basis. In recent years, we have redesigned and upgraded most of our line, making the best even better! Our 500-plus different models now appear in eight groups1 that are clearly defined by function.
Getting Started 2 KRAMER: SIMPLE CREATIVE TECHNOLOGY
Overview 3 Overview The VS-2DVA is an all-in-one 2x1 switcher for DVI, XGA/UXGA1, and unbalanced audio signals.
Your VS-2DVA 2x1 DVI / XGA / Audio Switcher Figure 1: VS-2DVA 2x1 DVI / XGA / Audio Switcher Table 1: Front Panel VS-2DVA 2x1 DVI / XGA1 / Audio Switcher Features # 1 2 3 4 Feature POWER Switch SELECTOR Buttons 5 AUDIO-XGA 3.5mm Mini Jack Connectors 6 7 8 9 10 11 12 13 14 DVI XGA1 GANG DVI+XGA1 OUT IN XGA 15-pin HD Connectors OUTPUT INPUT REMOTE Terminal Block Connector AUDIO-DVI 3.
Connecting the VS-2DVA 2x1 DVI / XGA / Audio Switcher 5 Connecting the VS-2DVA 2x1 DVI / XGA / Audio Switcher To connect1 your VS-2DVA 2x1 DVI / XGA / Audio Switcher, as the example in Figure 2 illustrates, do the following2: 1. Connect an XGA source (for example, a laptop’s digital graphics card) to the INPUT 1 XGA 15-pin HD connector, and connect its audio to the IN 1 3.5mm mini jack3 (using a separate cable or the Kramer C-GMA/GMA cable4: VGA HD15M +Audio jack to VGA HD15M +Audio jack). 2.
Connecting the VS-2DVA 2x1 DVI / XGA / Audio Switcher Figure 2: Connecting the VS-2DVA 2x1 DVI / XGA / Audio Switcher 6 KRAMER: SIMPLE CREATIVE TECHNOLOGY
Connecting the VS-2DVA 2x1 DVI / XGA / Audio Switcher 5.1 Connecting the Contact Closure Remote Control PINS You can use the contact closure remote control PINS to: Route an input, and its corresponding unbalanced stereo audio output, by remote control Toggle the GANG selection, that is, switching the DVI and XGA inputs in a combined action or separately. (By default, at the moment that the GANG function is selected, the DVI selection takes priority over the XGA selection), see section 6.
Operating the VS-2DVA 2x1 DVI / XGA / Audio Switcher 6 Operating the VS-2DVA 2x1 DVI / XGA / Audio Switcher The VS-2DVA automatically selects DVI INPUT 1 and XGA INPUT 1 when the VS-2DVA is turned ON (see Figure 4): Figure 4: Initial Status of the SELECTOR Buttons You can switch one of the two DVI inputs1 to the corresponding DVI output2, and one of the two XGA inputs1 to the corresponding XGA output2, either: Separately, see section 6.1 Together (Ganged), see section 6.2 6.
Technical Specifications 7 Technical Specifications Table 2 includes the technical specifications: 1 Table 2: Technical Specifications of the VS-2DVA 2x1 DVI / XGA / Audio Switcher INPUTS: 2 MAX. OUTPUT LEVEL: 2 XGA/UXGA on 15-pin HD connectors; with corresponding 2 unbalanced stereo audio 4dBm/50k on 3.5mm mini jacks 3 2 DVI , 1.2Vpp on DVI Molex 24pin female connectors; DDC signal 5Vpp (TTL); with corresponding 2 unbalanced stereo audio 4dBm/50k on 3.
LIMITED WARRANTY Kramer Electronics (hereafter Kramer) warrants this product free from defects in material and workmanship under the following terms. HOW LONG IS THE WARRANTY Labor and parts are warranted for seven years from the date of the first customer purchase. WHO IS PROTECTED? Only the first purchase customer may enforce this warranty. WHAT IS COVERED AND WHAT IS NOT COVERED Except as below, this warranty covers all defects in material or workmanship in this product.
For the latest information on our products and a list of Kramer distributors, visit our Web site: www.kramerelectronics.com, where updates to this user manual may be found. We welcome your questions, comments and feedback. Safety Warning: Disconnect the unit from the power supply before opening/servicing. Caution Kramer Electronics, Ltd. Web site: www.kramerelectronics.com E-mail: info@kramerel.