Owner's manual

30
VS-41HDCP - Kramer Protocol
Command Name
Short Cmd
Command Type
Permission
NET-GATE?
NTGT?
Ethernet
End User
Get Gateway IP
Syntax
#NET-GATE?␍
Response
~nn@ NET-GATE␠ ip_address ␍␊
Parameters
ip_address – format: xxx.xxx.xxx.xxx
Notes
Network gateway allowed connecting to device via another network and maybe over
Internet. Be careful of security problems.
Command Name
Short Cmd
Command Type
Permission
NET-IP
NTIP
Ethernet
Administrator
Set device IP address
Syntax
#NET-IP␠ ip_address ␍
Response
~nn@ NET-IP ␠ ip_address ␠OK␍␊
Parameters
ip_address – format: xxx.xxx.xxx.xxx
Notes
For proper settings consult your network administrator
Command Name
Short Cmd
Command Type
Permission
NET-IP?
NTIP?
Ethernet
End User
Get device IP address
Syntax
#NET-IP?␍
Response
~nn@ NET-IP ␠ ip_address ␍␊
Parameters
ip_address – format: xxx.xxx.xxx.xxx where x is decimal digit.
Command
Name
Short Cmd
Command Type
Permission
NET-MAC?
NTMC?
Ethernet
End User
Get MAC address
Syntax
#NET-MAC?␍
Response
~nn@NET-MAC␠ mac_address␍␊
Parameters
mac_address – Unique MAC address. Format: XX-XX-XX-XX-XX-XX where X is hex digit.