User guide

VS-44HDCP – Contents
i
Contents
1 Introduction 1
2 Getting Started 2
2.1 Achieving the Best Performance 2
2.2 Safety Instructions 2
2.3 Recycling Kramer Products 3
3 Overview 4
3.1 Defining the VS-44HDCP 4x4 DVI Matrix Switcher 5
4 Installing in a Rack 7
5 Connecting the VS-44HDCP 8
6 Operating the VS-44HDCP 4x4 DVI Matrix Switcher 10
6.1 Routing Inputs to Outputs 10
6.2 Disconnecting the Outputs 10
6.3 Storing and Recalling a Setup 11
6.4 Locking and Unlocking the Front Panel 12
6.5 Acquiring the EDID 12
6.6 Resetting the Ethernet Configuration to Default Values 14
7 Controlling the VS-44HDCP 15
7.1 Connecting to the VS-44HDCP via RS-232 15
7.2 Operating via ETHERNET 15
7.3 Using the IR Transmitter 20
8 Firmware Upgrade 21
9 Technical Specifications 22
10 Default Communication Parameters 23
11 Default EDID 24
12 Protocol 3000 26
12.1 Kramer Protocol 3000 Syntax 26
12.2 Kramer Protocol 3000 Commands 29
13 Kramer Protocol 2000 30
Figures
Figure 1: VS-44HDCP 4x4 DVI Matrix Switcher Front Panel 5
Figure 2: VS-44HDCP 4x4 DVI Matrix Switcher Rear Panel 6
Figure 3: Connecting to the VS-44HDCP Rear Panel 9
Figure 4: SELECTOR Buttons 11
Figure 5: Local Area Connection Properties Window 16
Figure 6: Internet Protocol Version 4 Properties Window 17
Figure 7: Internet Protocol Version 6 Properties Window 18
Figure 8: Internet Protocol Properties Window 19