User manual

VS-44HDCP - Operating the VS-44HDCP 4x4 DVI Matrix Switcher

6.4 Changing the Port Switching Speed

The switching speed can be set per port to any of the following:

 3—Normal (default)

 2—Fast

 1—Extra fast

To change the port switching speed:

1. Ensure that the device is in normal switching mode, (that is, not Store,

Recall or EDID mode).

2. Press the RCL and EDID buttons at the same time.

The RCL and EDID buttons flash, and the display indicates the switching

speed mode of each port.

IN 1, IN 2 and IN 3 are illuminated (red).

3. Press one or more (or ALL) of the OUT buttons to select the port to change.

The selected port setting on the LED display flashes.

4. Press one of the IN 1/IN 2/IN 3 button to toggle the switching speed, (to Extra

fast/Fast/Normal, respectively).

The switching speed displayed changes for the selected ports.

5. Press the LOCK button to confirm the change.

The switching speed for the selected port is changed and the device reverts

to the normal switching mode.

Note: If the LOCK button is not pressed within about 12 seconds, the device exits

the port speed switching mode automatically and all changes are lost.

6.5 Setting HDCP to On/Off

HDCP support can be enabled (On) or disabled (Off) for each of the HDMI inputs,

allowing the source to transmit a non-HDCP signal if required (for example, when

working with a Mac computer)