User manual

30
VS-44HDCP - Protocol 3000
Command - GEDID
Command Type - System
Command Name
Permission
Transparency
Get:
GEDID
End User
Public
Description
Syntax
Get:
Read EDID data
#GEDID␠ eeprom_id ␍
Response
Multi line response:
~nn@GEDID␠ eeprom_id,size␍␊
EDID_data␍␊
~nn@GEDID␠ eeprom_id ␠OK␍␊
Parameters
eeprom_id – EEPROM to get the EDID from
size – Device sends this parameter in response. Size of EDID that will print.
edid_data – EDID data as stream of bytes.
Response Triggers
Response is sent to the com port from which the Set (before execution) / Get command was received
Notes
For Get, size=0 means EDID is not supported
For old devices that do not support this command, ~nn@ ERR 002␍␊ is received
Command – GEDID-EXT
Command Type - Common
Command Name
Permission
Transparency
Get:
GEDID-EXT
End User
Public
Description
Syntax
Get:
Read EDID from external device
connected to output
#GEDID-EXT␠ out_id ␍
Response
Multi line response:
~nn@GEDID-EXT␠ out_id,size␍␊
EDID_data␍␊
~nn@GEDID-EXT␠ out_id ␠OK␍␊
Parameters
out_id – EEPROM to get the EDID from
size – Device sends this parameter in response. Size of EDID that will print.
edid_data – EDID data as stream of bytes.