Kramer Electronics, Ltd.
Contents Contents 1 2 2.1 3 3.1 3.2 3.3 3.4 4 4.1 5 6 7 7.1 7.2 Introduction Getting Started Quick Start Overview Defining the EDID About HDMI About HDCP Recommendations for Best Performance Defining the VS-48H 4x8 HDMI Matrix Switcher Using the IR Transmitter Installing the VS-48H in a Rack Connecting the VS-48H 4x8 HDMI Matrix Switcher Operating the VS-48H 4x8 HDMI Matrix Switcher Switching an Input to an Output Acquiring the EDID 1 1 2 3 3 4 4 5 5 8 9 10 11 11 11 7.3 7.4 7.5 7.
Contents Tables Table 1: VS-48H 4x8 HDMI Matrix Switcher Front Panel Features Table 2: VS-48H 4x8 HDMI Matrix Switcher Rear Panel Features Table 3: Technical Specifications of the VS-48H 4x8 HDMI Matrix Switcher Table 4: Default Communication Parameters Table 5: Protocol Definitions Table 6: Instruction Codes for Protocol 2000 ii 6 7 16 19 20 21 KRAMER: SIMPLE CREATIVE TECHNOLOGY
Introduction 1 Introduction Welcome to Kramer Electronics! Since 1981, Kramer Electronics has been providing a world of unique, creative, and affordable solutions to the vast range of problems that confront the video, audio, presentation and broadcasting professional on a daily basis. In recent years we have redesigned and upgraded most of our line, making the best even better! Our 1,000-plus different models now appear in 11 groups 1 that are clearly defined by function.
Getting Started 2.1 Quick Start This quick start chart summarizes the basic setup and operation steps.
Overview 3 Overview The VS-48H is a high quality 4 x 8 matrix switcher for HDMI signals that fits into one vertical space of a standard 19” professional rack enclosure. In particular, the VS-48H features: • Up to 2.25Gbps bandwidth per graphic channel 1 • Support for HDCP (High Definition Digital Content Protection) • HDMI Support – HDMI (V1.4 with 3D, Deep Color, x.v.
Overview 3.2 About HDMI High-Definition Multimedia Interface (HDMI) is an uncompressed all-digital 1 audio/video interface, widely supported in the entertainment and home cinema industry. It delivers the highest high-definition image and sound quality. Note that Kramer Electronics Limited is an HDMI Adopter and an HDCP Licensee.
Defining the VS-48H 4x8 HDMI Matrix Switcher copyrighted material. To protect copyright holders (such as movie studios) from having their programs copied and shared, the HDCP standard provides for the secure and encrypted transmission of digital signals. 3.
Defining the VS-48H 4x8 HDMI Matrix Switcher Figure 1: VS-48H 4x8 HDMI Matrix Switcher Front Panel Table 1: VS-48H 4x8 HDMI Matrix Switcher Front Panel Features 1 2 3 4 5 # IR LED IR Receiver POWER LED ALL Button OFF Button 6 7 8 STO Button RCL Button LOCK Button 9 10 11 12 EDID Button Feature SELECT Buttons 2 IN (1 to 4) OUT (1 to 8) INPUT 7-segment LED Display Function Lights yellow when receiving signals from the infrared remote control transmitter Signal receiver for the Infrared remote cont
Defining the VS-48H 4x8 HDMI Matrix Switcher Figure 2: VS-48H 4x8 HDMI Matrix Switcher Rear Panel Table 2: VS-48H 4x8 HDMI Matrix Switcher Rear Panel Features # 13 14 15 16 17 18 Feature OUT HDMI Connectors (1 to 8) IN HDMI Connectors (1 to 4) RS-232 9-pin D-sub Serial Port Connector ETHERNET RJ-45 Connector ETH RESET Button REMOTE IR Opening 2 19 20 21 Mains Power Connector Mains Power Fuse Mains Power Switch Connect to up to 8 HDMI acceptors Connect to up to 4 HDMI sources Connect to a PC/serial cont
Defining the VS-48H 4x8 HDMI Matrix Switcher 4.1 Using the IR Transmitter You can use the RC-IR3 IR transmitter to control the device via the built-in IR receiver on the front panel or, instead, via an optional external IR receiver 1. The external IR receiver can be located 15m (49ft) away from the device.
Installing the VS-48H in a Rack 5 Installing the VS-48H in a Rack This section provides instructions for rack mounting the device. .
Connecting the VS-48H 4x8 HDMI Matrix Switcher 6 Connecting the VS-48H 4x8 HDMI Matrix Switcher To connect 1 the VS-48H 4x8 HDMI Matrix Switcher as illustrated in the example in Figure 3: 1. Connect up to four 2 HDMI sources (for example, DVD players) to the IN HDMI connectors. 2. Connect the eight 3 OUT HDMI connectors to up to eight HDMI acceptors (for example, LCD displays with built-in speakers). 3. If required, connect a PC/controller to the RS-232 port (see Section 7.
Operating the VS-48H 4x8 HDMI Matrix Switcher 7 Operating the VS-48H 4x8 HDMI Matrix Switcher This section describes: • Switching an input to an output (see Section 7.1) • Acquiring the EDID (see Section 7.2) • Storing and recalling switch settings (see Section 7.3) • Resetting the VS-48H (see Section 7.4) • Connecting to the VS-48H via RS-232 (see Section 7.5) • Connecting to the VS-48H via Ethernet (see Section 7.6) 7.
Operating the VS-48H 4x8 HDMI Matrix Switcher 7.2.2 Acquiring the EDID from Several Outputs To acquire the EDID from several outputs (for example, OUT 1 to IN 1 and OUT 6 to IN 3): 1. Connect the display devices to the outputs from which you want to acquire the EDIDs. 2. Press the EDID and STO buttons simultaneously and hold them for 3 seconds. Both buttons flash. 3. Press the input button to which the EDID will be copied (for example, IN 1). The selected input number flashes on the display. 4.
Operating the VS-48H 4x8 HDMI Matrix Switcher 7.3 Storing and Recalling a Switching Setting from a Preset The STO and RCL buttons are used to store and recall up to 12 setups which are assigned using the 8 output (preset 1 to 8) and 4 input (preset 9 to 12) buttons. To store a preset 1 (for example, Input 4/Output 3 in preset 10): 1. Configure the switching as required for the preset (for example, Input 4 to Output 3). 2. Press the STO button. The STO button flashes. 3.
Operating the VS-48H 4x8 HDMI Matrix Switcher 7.6 Connecting to the VS-48H 4x8 HDMI Matrix Switcher via Ethernet You can connect the VS-48H via the Ethernet, using a crossover cable (see Section 7.6.1) for direct connection to the PC or a straight through cable (see Section 7.6.2) for connection via a network hub or network router 1. 7.6.
Upgrading the Firmware 6. Select Use the following IP Address, and fill in the details as shown in Figure 5. 7. Click OK. Figure 5: Internet Protocol (TCP/IP) Properties Window 7.6.2 Connecting the Ethernet Port via a Network Hub You can connect the Ethernet port of the VS-48H to the Ethernet port on a network hub or network router, via a straight through cable with RJ-45 connectors.
Technical Specifications 9 Technical Specifications The VS-48H technical specifications are shown in Table 3. Table 3: Technical Specifications 1 of the VS-48H 4x8 HDMI Matrix Switcher INPUTS: OUTPUTS: BANDWIDTH: COMPLIANCE WITH HDMI STANDARD: RESOLUTION: POWER SOURCE: CONTROLS: DIMENSIONS: WEIGHT: ACCESSORIES: OPTIONS: 10 4 HDMI Connectors 8 HDMI Connectors 2.
Default EDID Timing characteristics Horizontal scan range.... 31-94kHz Vertical scan range...... 50-85Hz Video bandwidth.......... 170MHz CVT standard............. Not supported GTF standard............. Not supported Additional descriptors... None Preferred timing......... Yes Native/preferred timing.. 1280x720p at 60Hz Modeline............... "1280x720" 74.250 1280 1390 1430 1650 720 725 730 746 +hsync -vsync Detailed timing #1....... 1920x1080p at 60Hz (16:9) Modeline............... "1920x1080" 148.
Default EDID Detailed timing #5....... 1280x720p at 50Hz (16:9) Modeline............... "1280x720" 74.
Default Communication Parameters 11 Default Communication Parameters Table 4: Default Communication Parameters EDID data is passed between Output 1 and Input 1 EDID RS-232 Protocol 2000 Baud Rate: Data Bits: Stop Bits: Parity: Command Format: Example (Output 1 to Input 1): 9600 8 1 None HEX 0x01, 0x81, 0x81, 0x81 Ethernet Default Settings IP Address: Subnet Mask: Default Gateway: TCP Port: UDP Port: 192.168.1.39 255.255.255.0 192.168.1.
Kramer Protocol 2000 12 Kramer Protocol 2000 The VS-48H is compatible with Kramer’s Protocol 2000 1 (version 0.50). This RS-232/RS-485 communication protocol uses four bytes of information as defined below.
Kramer Protocol 2000 For a single machine controlled via the serial port, always set M4…M0 = 1, and make sure that the machine itself is configured as MACHINE NUMBER = 1. Table 6: Instruction Codes for Protocol 2000 Note: All values in the table are decimal, unless otherwise stated.
Kramer Protocol 2000 NOTE 8 - The reply is as in TYPE 3 above, except that here the OUTPUT is assigned with the value 0 if the setup is not defined / no valid input is detected; or 1 if it is defined / valid input is detected. NOTE 13 - This is a request to identify the switcher/s in the system. If the OUTPUT is set as 0, and the INPUT is set as 1, 2, 5 or 7, the machine will send its name. The reply is the decimal value of the INPUT and OUTPUT.
LIMITED WARRANTY We warrant this product free from defects in material and workmanship under the following terms. HOW LONG IS THE WARRANTY Labor and parts are warranted for seven years from the date of the first customer purchase. WHO IS PROTECTED? Only the first purchase customer may enforce this warranty. WHAT IS COVERED AND WHAT IS NOT COVERED Except as below, this warranty covers all defects in material or workmanship in this product. The following are not covered by the warranty: 1.
For the latest information on our products and a list of Kramer distributors visit www.kramerelectronics.com where updates to this user manual may be found. We welcome your questions, comments and feedback. Safety Warning: Disconnect the unit from the power supply before opening/servicing. Caution Kramer Electronics, Ltd. Web site: www.kramerelectronics.com E-mail: info@kramerel.