User manual

KRAMER: SIMPLE CREATIVE TECHNOLOGY

Connecting the VS-48HDxl 3G HD/SD SDI 4x8 Matrix Switcher

6.3 Dipswitch Settings

By default, all dipswitches are set to OFF.

Figure 4 illustrates the VS-48HDxl dipswitches:

Figure 4: VS-48HDxl SETUP Dipswitches

6.3.1 Setting the Setup Dipswitches

The setup dipswitches determine the address of each VS-48HDxl unit when

several VS-48HDxl units are connected to a PC or serial controller. Set the

address of the unit using the SETUP dipswitches 1, 2, 3 and 4, according to

Table 3.

When using a standalone VS-48HDxl unit, set the address to 1.

When connecting more than one VS-48HDxl unit, set the address of the first

machine (the Master) that is closest to the PC, to 1 (dipswitches are set to

OFF). Each additional VS-48HDxl unit must have a unique address.

Table 3: Machine # Dipswitch Settings

Address DIP 1 DIP 2 DIP 3 DIP 4

1 (default)

OFF OFF OFF OFF

2 OFF OFF OFF ON

3 OFF OFF ON OFF

4 OFF OFF ON ON

5 OFF ON OFF OFF

6 OFF ON OFF ON

7 OFF ON ON OFF

8 OFF ON ON ON