User manual

VS-48HN - Introduction
i
Contents
1 Introduction 1
2 Getting Started 2
2.1 Achieving the Best Performance 2
2.2 Safety Instructions 2
2.3 Recycling Kramer Products 3
3 Overview 4
3.1 About Fast Switching 5
3.2 Defining the VS-48HN 4x8 HDMI Matrix Switcher 5
3.3 Using the IR Transmitter 8
4 Installing in a Rack 9
5 Connecting the VS-48HN 4x8 HDMI Matrix Switcher 10
6 Operating the VS-48HN 4x8 HDMI Matrix Switcher 12
6.1 Switching an Input to an Output 12
6.2 Acquiring the EDID 12
6.3 Storing and Recalling a Preset 14
6.4 Changing the Port Switching Speed 15
6.5 Setting HDCP to On/Off 16
6.6 Resetting the IP Parameters 17
6.7 Switching Between Protocol 2000 and Protocol 3000 17
6.8 Connecting via RS-232 18
6.9 Connecting via Ethernet 18
6.10 Upgrading the Firmware 18
7 Technical Specifications 19
8 Default Communication Parameters 20
9 Default EDID 21
10 Kramer Protocol 2000 24
11 Protocol 3000 27
11.1 Kramer Protocol 3000 Syntax 27
11.2 Kramer Protocol 3000 Commands 30
11.3 Kramer Protocol 3000 – Detailed Commands 31
Figures
Figure 1: VS-48HN 4x8 HDMI Matrix Switcher Front Panel 6
Figure 2: VS-48HN 4x8 HDMI Matrix Switcher Rear Panel 7
Figure 3: Connecting the VS-48HN 4x8 HDMI Matrix Switcher 11
Figure 4: Store-Recall Button Configuration 14